Last update: January 25, 2008
 |
January 2008. Check out Fujitsu Components new connector web site! You will notice several different changes: |
| August 2007.
Expanding its PCMCIA card connector
offering, Fujitsu Components America
has introduced a very
low-profile connector for micro SD/TransFlash™ cards.
With a mounted height
of 1.6mm, it is the lowest profile connector currently
available for micro SD cards.
Featuring Fujitsu’s precise die-and-molding technology, the FCN-560 series micro SD connector measures 15mm(D) x 14mm(W) x 1.6mm (H) and has a life cycle of ten thousand insertions/withdrawals. The connector uses a proprietary push-push structure that provides positive tactile feedback during card insertion and withdrawal. A card drop protection mechanism prevents the card from falling out during pre-insertion and forced card extraction after it’s locked in. When ejected, the card travels 3.5mm from its locked position. The micro SD card connector offers a rated voltage of 5 Vac/dc and current of 0.5 A. Contact resistance is 100 mohm (initial) and the dielectric withstand voltage is 500 Vac for one minute. The operating temperature range is -20°C to 70°C. |
 |
 |
July 2007. Xmultiple's UltraJax is a whole new technology for RJ connectors. The UltraJax single port design offers a dual function RJ style connector which performs like two RJ45's, four RJ11's or both RJ45 and RJ12 or RJ11 combination depending on your application. Imagine having this functionality with half the space and cost. The UltraJax contact assemblies are housed with both eight contacts on top and eight on the bottom which makes the connector capable of performing multiple functions. The UltraJax can withstand a harsher environment and are more durable than the standard RJ connectors as the contacts are not exposed. To download the datasheet, click here. |
|
October 2006. I-PEX is an industry leading manufacturer of sub-miniature coaxial connectors. The product line includes small gauge coaxial connectors as well as ultra small gauge coaxial connectors for mobile, notebook, HDTV, medical, wireless, hard disk drive, and digital applicance applications Multiple fine pitch and cable size offerings in small coaxial gauges make this product line offering ideal for mimo and new wireless antenna devices as well as car electronics. New and continually developing product line offerings in the cabline and MHF coaxial connector lines address new development where small size and high speed connectors are required and small size and ultimate performance is required. For complete information on I-PEX's newest products, click here! |
 |
 |
April 2005.
Mill-Max
Mfg. Corp. offers a comprehensive range of solutions
for socketing CCD & CMOS Imagers having leaded (pinned)
packages.
Features: Thru-hole and surface mount sockets with pin spacings on 100”, 2mm, .070”, .050”, 1mm or 0.8mm grids. Thru-hole sockets available with solder preforms for intrusive reflow soldering. Molded high temp. or machined FR-4 insulators. Receptacle carriers that eliminate the socket insulator for extremely low profile applications. Pins are precision-machined copper alloy and incorporate a beryllium copper spring contact. Heat treated BeCu is the best electrical spring contact material to ensure security of the imager while maintaining its pluggability. Available with RoHS compliant materials. |
|
July 2004.
Mill-Max's
modular spring-loaded
contacts are perfect
for custom applications, and eight sizes of surface
mount contacts are available from .137" to .295"
profile. They can be arranged in arrays down to .100"
grid. Contacts have a precision-machined piston, base
and gold-plated components assuring a 100,000-min.
cycle life.
Custom spring-loaded connectors are typically used as the base unit (battery/charger) interface for portable equipment such as mobile phones/radios, bar code readers, medical and test instruments. They can also be used as a rugged surface-to-surface connector between circuit boards. For more information, click here. |
|
 |
April 2004.
Fujitsu Components America
has expanded its high-speed copper microGiGaCNTM
connector series by adding a vertical board-mount
I/O socket. The new socket expands Fujitsu’s
offering of standard, copper I/O and mid-plane interconnects
that comply with InfiniBand®, 10G CX4 Ethernet,
and 10G Fiber Channel requirements while meeting
the needs of other high-speed applications. For distances
less than 20m, the microGiGaCN series provides a low-cost
alternative to optical fiber. Optimized for differential
signal transmission of 3.125 Gbps and above over standard,
FR-4 material, the new microGiGaCN FCN-260(D) vertical
socket is available in 4x and 12x versions with latches
for InfiniBand applications. Download
the datasheet here.
|
|
|
September 2002.
Mill-Max offers two new pin/socket interconnect pairs for high-density
grid applications such as the termination of medical cables. Both
pin and receptacle are manufactured using precision turning technology.
The receptacle shell is seamless and sturdy, and comes assembled with
a hi-rel BeCu spring contact that makes excellent electrical and mechanical
contact to the mating pin. Insertion/extraction forces are low permitting
their use in high-density arrays. All components are gold-plated.
Interconnect pairs are suitable for .050" and 2mm pitch grid
applications. Both the male pins and female receptacles are terminated
with back holes for the attachment of fine gage instrument wires.
Interconnect pair for .050" pitch applications: Male Pin - Mill-Max part 4194-0-00-15-00-00-08-0 Interconnect pair for 2mm pitch applications: Male Pin - Mill-Max part 5556-0-00-15-00-00-38-0 |
Copyright © 1998 - 2008 PEI Electronic Sales, Inc. All Rights Reserved
PEI Electronic Sales, Inc. • 508 Twilight Trail, Ste 204 • Richardson, Texas 75080 • (972) 479-9777 • (972) 479-9778 [fax]